BMW 7 Series - 745i, 760i, 745Li, 750Li, 760Li Nav Video TV Interface - NV_BMW7
Go Back To Nav Video Module Vehicle Compatibility List
Connect A Video Input Such As A DVD Player, TV Tuner, Reverse Backup Camera, Video Game Console, iPod Video, Car PC or Other A/V Source To Your
BMW 7 Series - 745i, 760i, 745Li, 750Li, 760Li
OEM GPS Navigation LCD Display Screen! TV Nav Video Modules Are Easy To Install, Activated For Video In Motion And Are Completely Plug & Play.
| Model: |
|
| Vehicle Compatibility: |
- BMW 7 Series E65 (2002-2007) - 745i, 745Li, 750i, 750Li, 760i, 760Li
|
|
| Install Manual: |
 |
Product Overview:
Unleash the power of the OEM GPS sat nav system that is already installed in your BMW E65 7 Series (745i, 745Li, 760i, 760Li). The NV_BMW7 NavVideo module is the easiest way to interface a video source such as a DVD player, TV tuner, iPod Video, reverse backup video camera, video game console, PC, aftermarket satellite navigation system or any other AV source directly to your OEM GPS Navigation LCD screen display in the BMW E65 7 Series (745i, 745Li, 750i, 750Li, 760i, 760Li).
The NV_BMW7 is an easy to install, plug and play video module that will allow you to add any NTSC / PAL composite or RGB video source to your OEM GPS navigation LCD display screen. Our module works as long as you have the factory screen installed in your vehicle, regardless as to whether or not you have the nav option. The NV_BMW7 features 3 composite video inputs, and a dedicated backup camera input which is activated automatically when shifting the vehicle into reverse.
The NV_BMW7 is a video interface that is installed inside of your vehicle's LCD screen; it works simply by inserting a video signal into your video screen whenever you activate the "Mode" button that is provided. When your normal video is displayed simply turn on your external video source and activate the input via the Mode button (or the Menu button on the iDrive, when the optional CAN connection is made) and the normal video image is replaced by your video source; once you turn it back off, the normal image is displayed once again.
If you are looking for an easy and affordable way to add a video input to your BMW E65 7 Series (745i, 745Li, 760i, 760Li) GPS navigation LCD display screen, then the NV_BMW7 is the best product for the job.
Vehicle Specific Installation Information:
The NV_BMW7 module is very easy to install, however, please note that it requires partial disassembly of the factory screen. The NV_BMW7 comes complete with a full installation guide, required cables and Mode button. The NV_BMW7 is a video only interface, which means an FM modulator, FM transmitter or CD changer audio input interface adapter needs to be used to connect the audio signal from your external source to your audio system.
The NV_BMW7 is video-in-motion enabled, so the video image will stay on the screen even with the car in motion! This unit will work in vehicles with or without the factory GPS navigation option installed, but REQUIRES the factory LCD display to be present regardless.
| Optional Nav Video Accessories - Backup / Reverse Cameras |
License Plate Mounted Backup Camera With Night Vision
(NV_CAMERA1) -
$119 USD
Availability:
In Stock
|
The Nav Video Rear View Camera 1 is ideal for use with the Nav Video line of video interfaces. The camera is mounted to a black plastic frame that features two holes spaced apart for mounting on your vehicles license plate frame. Installation is easy. Simply remove the screws from your license plate, place the camera over the license plate. Then re-attach the screws. The camera adjusts up and down, to allow you to adjust the angle of the video image.
This particular backup camera has night vision IR sensors that allow you to see what's behind you even in low light or no light environments.
The Nav Video Rear View Camera 1 uses CMOS technology. The enclosure is completely waterproof and is ideal for quick and easy license plate installation..
| Image Sensor |
1/3" CMOS |
| TV System |
NTSC |
| Display Pixels |
628 x 528 pixels |
| Resolution |
420 TV Lines |
| Lens Size |
2.8mm |
| Lens Viewing Angle |
120 Degrees |
| Water Proof |
IP 67 / IP 68 |
| Power Supply |
12V DC |
| Operating Temperature |
-20C + 75C |
| Storage Temperature |
-40C + 85C |
| Mounting Type |
On License Plate Frame |
|
Surface Mount / License Plate Mount Backup Camera With Night Vision
(NV_CAMERA2) -
$119 USD
Availability:
In Stock
|
The Nav Video Rear View Camera 2 is ideal for use with the Nav Video line of video interfaces. Simply install the camera, connect the video signal to the Nav Video module along with the vehicles reverse wire. When the vehicle is put into reverse, the video image on the module will automatically switch and show the camera video image.
This particular backup camera has night vision IR sensors that allow you to see what's behind you even in low light or no light environments.
The Nav Video Rear View Camera 2 uses CMOS technology. The enclosure is completely waterproof and can easily be surface mounted to the plastic bumper, or license plate frame with two screws or bolts (not provided).
| Image Sensor |
CMOS |
| TV System |
NTSC |
| Display Pixels |
512 x 492 pixels |
| Resolution |
380 TV Lines |
| Lens Viewing Angle |
135 Degrees |
| Water Proof |
IP 67 / IP 68 |
| Power Supply |
8-13V DC |
| Operating Temperature |
-30C + 85C |
| Storage Temperature |
-40C + 85C |
| Mounting Type |
Surface Mount |
|
Flush Mount Backup Camera With Night Vision
(NV_CAMERA3) -
$129 USD
Availability:
In Stock
|
The Nav Video Rear View Camera 3 is ideal for use with the Nav Video line of video interfaces. Simply install the camera, connect the video signal to the Nav Video module along with the vehicles reverse wire. When the vehicle is put into reverse, the video image on the module will automatically switch and show the camera video image.
This particular backup camera has night vision IR sensors that allow you to see what's behind you even in low light or no light environments.
The Nav Video Rear View Camera 3 uses CCD technology, which provides a much clearer image than regular CMOS cameras. The enclosure is completely waterproof and is ideal for flush mount installations.
| Image Sensor |
1/3" Sharp CCD |
| TV System |
NTSC |
| Display Pixels |
512 x 492 pixels |
| Resolution |
420 TV Lines |
| Lens Size |
2.8mm |
| Lens Viewing Angle |
120 Degrees |
| Water Proof |
IP 67 / IP 68 |
| Power Supply |
12V DC |
| Operating Temperature |
-20C + 75C |
| Storage Temperature |
-40C + 85C |
| Mounting Hole Size |
28mm / 1 1/8" |
|
License Plate Frame Backup Camera With Night Vision
(NV_CAMERA4) -
$179 USD
Availability:
In Stock
|
The Nav Video Rear View Camera 4 is a complete license plate frame / camera solution. The standard license plate frame is made of black plastic and features infra red night vision sensors all around it for optimal image viewing in low light conditions. The camera itself is mounted on a swiveling base which allows you to adjust the angle of the camera up or down depending on the height of your license plate.
This particular backup camera has night vision IR sensors that allow you to see what's behind you even in low light or no light environments.
The Nav Video Rear View Camera 4 uses CCD technology, which provides a much clearer image than regular CMOS cameras. The enclosure is completely waterproof and is ideal for flush mount installations.
| Image Sensor |
1/3" Sharp CCD |
| TV System |
NTSC |
| Display Pixels |
628 x 512 pixels |
| Resolution |
420 TV Lines |
| Lens Size |
2.8mm |
| Lens Viewing Angle |
120 Degrees |
| Water Proof |
IP 67 / IP 68 |
| Power Supply |
12V DC |
| Operating Temperature |
-20C + 75C |
| Storage Temperature |
-40C + 85C |
| Mounting Type |
Complete License Plate Frame |
|
Surface Mount Miniature Backup Camera
(NV_CAMERA5) -
$149 USD
Availability:
In Stock
|
The NAV Video CAMERA5 Rear View Camera is ideal for use with the NAV Video line of video interfaces. The camera is mounted to any surface such as trunk lid lip etc. Installation is easy. Simply mount the camera using 3M double-side tape or self tapping screws. The camera adjusts up and down, to allow you to adjust the angle of the video image. The NAV Video CAMERA5 Rear View Camera uses CCD technology. The enclosure is completely waterproof and is ideal for surface mount installations.
| Image Sensor |
1/4" CCD |
| TV System |
NTSC |
| Display Pixels |
510 x 492 pixels |
| Resolution |
420 TV Lines |
| Lens Size |
2.0mm |
| Lens Viewing Angle |
170 Degrees |
| Water Proof |
IP 67 / IP 68 |
| Power Supply |
12V DC |
| Operating Temperature |
-20C + 75C |
| Storage Temperature |
-40C + 85C |
| Mounting Type |
Self Tapping Screws/2 sided tape |
|
Why The Nav Video RGB Unit Is Better The Our Competitors:
- Professionally manufactured board in a rugged metal case.
- Plug-And-Play wiring harness for easy installation into your vehicle.
- Mode button or optional CAN connection makes controlling the unit and switching video inputs easy!
- 1 year warranty.
- High picture quality.
- Works with NTSC/PAL composite as well as RGB video sources.
Product Overview:
