Porsche Cayenne Nav Video TV Interface - NV_RGB2_CAYENNE
Go Back To Nav Video Module Vehicle Compatibility List
Connect A Video Input Such As A DVD Player, TV Tuner, Reverse Backup Camera, Video Game Console, iPod Video or Other A/V Source To Your
Porsche Cayenne
OEM GPS Navigation LCD Display Screen! TV Nav Video Modules Are Easy To Install, Activated For Video In Motion And Are Completely Plug & Play.
| Model: |
|
| Vehicle Compatibility: |
- Porsche Cayenne (2005-2006)
|
|
| Install Manual: |
 |
Product Overview:
Unleash the power of the OEM GPS sat nav system that is already installed in your
Porsche Cayenne
. The
NV_RGB2_CAYENNE
NavVideo module is the easiest way to interface a video source such as a DVD player, TV tuner, iPod Video, reverse backup video camera, video game console, PC, aftermarket satellite navigation system or any other AV source directly to your OEM GPS Navigation LCD screen display in the Porsche Cayenne.
The
NV_RGB2_CAYENNE
is an easy to install, plug and play video module that will allow you to add any composite or RGB video source to your OEM GPS navigation LCD display screen. Our module works as long as you have the factory screen installed in your vehicle, regardless as to whether or not you have the nav option. The
NV_RGB2_CAYENNE
features dual composite video inputs and one RGB input.
The
NV_RGB2_CAYENNE
is two piece system which consists of an externally wired plug-and-play RGB module and an internal RGB circuit board which is installed within the OEM navigation head unit; it works simply by interrupting the RGB video signal from your GPS computer whenever you select the "Input" button on the IR remote that is provided. When your GPS is displayed simply turn on your external video source and activate the input on the remote control and the GPS video image is replaced by your video source, once you turn it back off, the GPS image is displayed once again.
If you are looking for an easy and affordable way to add a video input to your
Porsche Cayenne
GPS navigation LCD display screen, then the
NV_RGB2_CAYENNE
is the best product for the job.
Vehicle Specific Installation Information:
The
NV_RGB2_CAYENNE
is a two piece system that allows you to connect up to two video composite video inputs to your
Porsche Cayenne
original OEM GPS navigation system LCD display. The two piece system consists of an external RGB converter box and an RGB circuit board which is installed inside the car's LCD nav head unit. The external RGB box accepts an NTSC composite video input well as an RGB video input then converts them to a standard analog RGB signal, this is then connected to the other piece of the system, which is the internal circuit board installed inside of the radio. This internal board converts the analog RGB signal to TTL digital RGB that the LCD screen can then display.
The first step in the installation is to remove the head unit from the car, and open it up to expose its internal circuitry. The small RGB circuit board is then installed into the radio along with the provided ribbon cable. A small wire is then run from the internal RGB circuit board, to the external RGB converter module which is located outside of the radio. Please note that due to the complexity of this interface installation we recommend that installation be performed by a knowledgeable car electronics professional.
The
NV_RGB2_CAYENNE
is a video input only solution, thus an FM modulator or other auxiliary audio input interface is required to bring audio into the sound system.
The
NV_RGB2_CAYENNE
is video-in-motion enabled, so the video image will stay on the screen even with the car in motion! This unit will work in vehicles with or without the factory GPS navigation option installed, but REQUIRES the factory LCD display to be present regardless.
| Optional Nav Video Accessories - Backup / Reverse Cameras |
License Plate Mounted Backup Camera With Night Vision
(NV_CAMERA1) -
$119 USD
Availability:
In Stock
|
The Nav Video Rear View Camera 1 is ideal for use with the Nav Video line of video interfaces. The camera is mounted to a black plastic frame that features two holes spaced apart for mounting on your vehicles license plate frame. Installation is easy. Simply remove the screws from your license plate, place the camera over the license plate. Then re-attach the screws. The camera adjusts up and down, to allow you to adjust the angle of the video image.
This particular backup camera has night vision IR sensors that allow you to see what's behind you even in low light or no light environments.
The Nav Video Rear View Camera 1 uses CMOS technology. The enclosure is completely waterproof and is ideal for quick and easy license plate installation..
| Image Sensor |
1/3" CMOS |
| TV System |
NTSC |
| Display Pixels |
628 x 528 pixels |
| Resolution |
420 TV Lines |
| Lens Size |
2.8mm |
| Lens Viewing Angle |
120 Degrees |
| Water Proof |
IP 67 / IP 68 |
| Power Supply |
12V DC |
| Operating Temperature |
-20C + 75C |
| Storage Temperature |
-40C + 85C |
| Mounting Type |
On License Plate Frame |
|
Surface Mount / License Plate Mount Backup Camera With Night Vision
(NV_CAMERA2) -
$119 USD
Availability:
In Stock
|
The Nav Video Rear View Camera 2 is ideal for use with the Nav Video line of video interfaces. Simply install the camera, connect the video signal to the Nav Video module along with the vehicles reverse wire. When the vehicle is put into reverse, the video image on the module will automatically switch and show the camera video image.
This particular backup camera has night vision IR sensors that allow you to see what's behind you even in low light or no light environments.
The Nav Video Rear View Camera 2 uses CMOS technology. The enclosure is completely waterproof and can easily be surface mounted to the plastic bumper, or license plate frame with two screws or bolts (not provided).
| Image Sensor |
CMOS |
| TV System |
NTSC |
| Display Pixels |
512 x 492 pixels |
| Resolution |
380 TV Lines |
| Lens Viewing Angle |
135 Degrees |
| Water Proof |
IP 67 / IP 68 |
| Power Supply |
8-13V DC |
| Operating Temperature |
-30C + 85C |
| Storage Temperature |
-40C + 85C |
| Mounting Type |
Surface Mount |
|
Flush Mount Backup Camera With Night Vision
(NV_CAMERA3) -
$129 USD
Availability:
In Stock
|
The Nav Video Rear View Camera 3 is ideal for use with the Nav Video line of video interfaces. Simply install the camera, connect the video signal to the Nav Video module along with the vehicles reverse wire. When the vehicle is put into reverse, the video image on the module will automatically switch and show the camera video image.
This particular backup camera has night vision IR sensors that allow you to see what's behind you even in low light or no light environments.
The Nav Video Rear View Camera 3 uses CCD technology, which provides a much clearer image than regular CMOS cameras. The enclosure is completely waterproof and is ideal for flush mount installations.
| Image Sensor |
1/3" Sharp CCD |
| TV System |
NTSC |
| Display Pixels |
512 x 492 pixels |
| Resolution |
420 TV Lines |
| Lens Size |
2.8mm |
| Lens Viewing Angle |
120 Degrees |
| Water Proof |
IP 67 / IP 68 |
| Power Supply |
12V DC |
| Operating Temperature |
-20C + 75C |
| Storage Temperature |
-40C + 85C |
| Mounting Hole Size |
28mm / 1 1/8" |
|
License Plate Frame Backup Camera With Night Vision
(NV_CAMERA4) -
$179 USD
Availability:
In Stock
|
The Nav Video Rear View Camera 4 is a complete license plate frame / camera solution. The standard license plate frame is made of black plastic and features infra red night vision sensors all around it for optimal image viewing in low light conditions. The camera itself is mounted on a swiveling base which allows you to adjust the angle of the camera up or down depending on the height of your license plate.
This particular backup camera has night vision IR sensors that allow you to see what's behind you even in low light or no light environments.
The Nav Video Rear View Camera 4 uses CCD technology, which provides a much clearer image than regular CMOS cameras. The enclosure is completely waterproof and is ideal for flush mount installations.
| Image Sensor |
1/3" Sharp CCD |
| TV System |
NTSC |
| Display Pixels |
628 x 512 pixels |
| Resolution |
420 TV Lines |
| Lens Size |
2.8mm |
| Lens Viewing Angle |
120 Degrees |
| Water Proof |
IP 67 / IP 68 |
| Power Supply |
12V DC |
| Operating Temperature |
-20C + 75C |
| Storage Temperature |
-40C + 85C |
| Mounting Type |
Complete License Plate Frame |
|
Surface Mount Miniature Backup Camera
(NV_CAMERA5) -
$149 USD
Availability:
In Stock
|
The NAV Video CAMERA5 Rear View Camera is ideal for use with the NAV Video line of video interfaces. The camera is mounted to any surface such as trunk lid lip etc. Installation is easy. Simply mount the camera using 3M double-side tape or self tapping screws. The camera adjusts up and down, to allow you to adjust the angle of the video image. The NAV Video CAMERA5 Rear View Camera uses CCD technology. The enclosure is completely waterproof and is ideal for surface mount installations.
| Image Sensor |
1/4" CCD |
| TV System |
NTSC |
| Display Pixels |
510 x 492 pixels |
| Resolution |
420 TV Lines |
| Lens Size |
2.0mm |
| Lens Viewing Angle |
170 Degrees |
| Water Proof |
IP 67 / IP 68 |
| Power Supply |
12V DC |
| Operating Temperature |
-20C + 75C |
| Storage Temperature |
-40C + 85C |
| Mounting Type |
Self Tapping Screws/2 sided tape |
|
Why The Nav Video RGB Unit Is Better The Our Competitors:
- Professionally manufactured board in a rugged metal case.
- Plug-And-Play wiring harness for easy installation into your vehicle.
- Remote with IR extender makes controlling the unit and switching video inputs easy!
- 1 year warranty.
- High picture quality.
- Works with NTSC composite as well as RGB video sources.
