Nissan - Infiniti Nav Video TV Interface - NV_RGB3_NISSANINF
Go Back To Nav Video Module Vehicle Compatibility List
Connect A Video Input Such As A DVD Player, TV Tuner, Reverse Backup Camera, Video Game Console, iPod Video or Other A/V Source To Your
Nissan - Infiniti
OEM GPS Navigation LCD Display Screen! TV Nav Video Modules Are Easy To Install, Activated For Video In Motion And Are Completely Plug & Play.
| Model: |
|
| Vehicle Compatibility: |
- Nissan Murano (2004-2007)
- Nissan Armada (2004-2007)
- Nissan Maxima (2004-2007)
- Nissan Titan (2004-2006)
|
- Nissan Quest (2004-2007)
- Infiniti FX35 / FX45 (2004-2007)
- Infiniti QX56 (2004-2007)
- Infiniti G37 (2006-2009)
|
|
| Install Manual: |
 |
Product Overview:
The NV_RGB3_NISSANINF video module is the easiest way to interface a video source such as a DVD Player, TV Tuner, Reverse Backup Video Camera, iPod Video, Video Game Console, PC with composite output or other video source directly to your
Nissan - Infiniti
OEM GPS Navigation LCD screen / LCD Display. The NV_RGB3_NISSANINF features dual composite video inputs, plus one input for a rear camera that can be activated automatically when shifting the vehicle into reverse (usually used with a back-up camera). The NV_RGB3 unit also features an RGB input to allow the connection of an aftermarket nav system or other RGB video device. An infra red remote control is included with the unit for switching video sources.
The NV_RGB3_NISSANINF is an externally wired plug and play RGB converter interface that is installed behind the screen in your
Nissan - Infiniti
vehicle; it works by interrupting the RGB video signal to the screen when you press the Mode button or activate 12V on the reverse camera line. When this occurs the video image will be replaced by the video input that is connected to the NV_RGB3_NISSANINF module. The remote will allow you to switch video sources as well.
The NV_RGB3_NISSANINF is a video input only interface module, which means an FM modulator, FM transmitter or CD changer audio input interface adapter needs to be used to connect the audio signal from your external AV source to your audio system if your vehicle does not have an auxiliary input already available. The NV_RGB3_NISSANINF is video-in-motion enabled, so the video image will stay on the screen even with the car in motion (however we do not recommend or endorse this).
Vehicle Specific Installation Information:
This kit includes the NV_RGB3_NISSANINF module and a plug and play wiring harness that features an OEM 24pin Nissan / Infiniti molex connector which plugs in behind the navigation LCD screen of your
Nissan - Infiniti
vehicle. You can view a photo of the wiring harness provided by clicking on the "View Module Wiring Harness" button below.
Simply plug the vehicles OEM wiring harness into one end of the wiring harness provided with the NV_RGB3_NISSANINF module, then plug the other end of the NV_RGB3_X harness into the location where the vehicle's wiring harness was. Then connect 12V power, ground and backup camera connector (if required). The installation is really that simple! Since the unit is plug and play and only requires extra wiring for 12V and ground, it will not void your vehicle's factory warranty! Please read our product disclaimer to ensure the safe use of our Nav Video modules.
The NV_RGB3_X works only with NTSC composite output video devices, it will not work with european PAL devices.
| Optional Nav Video Accessories - Backup / Reverse Cameras |
License Plate Mounted Backup Camera With Night Vision
(NV_CAMERA1) -
$119 USD
Availability:
In Stock
|
The Nav Video Rear View Camera 1 is ideal for use with the Nav Video line of video interfaces. The camera is mounted to a black plastic frame that features two holes spaced apart for mounting on your vehicles license plate frame. Installation is easy. Simply remove the screws from your license plate, place the camera over the license plate. Then re-attach the screws. The camera adjusts up and down, to allow you to adjust the angle of the video image.
This particular backup camera has night vision IR sensors that allow you to see what's behind you even in low light or no light environments.
The Nav Video Rear View Camera 1 uses CMOS technology. The enclosure is completely waterproof and is ideal for quick and easy license plate installation..
| Image Sensor |
1/3" CMOS |
| TV System |
NTSC |
| Display Pixels |
628 x 528 pixels |
| Resolution |
420 TV Lines |
| Lens Size |
2.8mm |
| Lens Viewing Angle |
120 Degrees |
| Water Proof |
IP 67 / IP 68 |
| Power Supply |
12V DC |
| Operating Temperature |
-20C + 75C |
| Storage Temperature |
-40C + 85C |
| Mounting Type |
On License Plate Frame |
|
Surface Mount / License Plate Mount Backup Camera With Night Vision
(NV_CAMERA2) -
$119 USD
Availability:
In Stock
|
The Nav Video Rear View Camera 2 is ideal for use with the Nav Video line of video interfaces. Simply install the camera, connect the video signal to the Nav Video module along with the vehicles reverse wire. When the vehicle is put into reverse, the video image on the module will automatically switch and show the camera video image.
This particular backup camera has night vision IR sensors that allow you to see what's behind you even in low light or no light environments.
The Nav Video Rear View Camera 2 uses CMOS technology. The enclosure is completely waterproof and can easily be surface mounted to the plastic bumper, or license plate frame with two screws or bolts (not provided).
| Image Sensor |
CMOS |
| TV System |
NTSC |
| Display Pixels |
512 x 492 pixels |
| Resolution |
380 TV Lines |
| Lens Viewing Angle |
135 Degrees |
| Water Proof |
IP 67 / IP 68 |
| Power Supply |
8-13V DC |
| Operating Temperature |
-30C + 85C |
| Storage Temperature |
-40C + 85C |
| Mounting Type |
Surface Mount |
|
Flush Mount Backup Camera With Night Vision
(NV_CAMERA3) -
$129 USD
Availability:
In Stock
|
The Nav Video Rear View Camera 3 is ideal for use with the Nav Video line of video interfaces. Simply install the camera, connect the video signal to the Nav Video module along with the vehicles reverse wire. When the vehicle is put into reverse, the video image on the module will automatically switch and show the camera video image.
This particular backup camera has night vision IR sensors that allow you to see what's behind you even in low light or no light environments.
The Nav Video Rear View Camera 3 uses CCD technology, which provides a much clearer image than regular CMOS cameras. The enclosure is completely waterproof and is ideal for flush mount installations.
| Image Sensor |
1/3" Sharp CCD |
| TV System |
NTSC |
| Display Pixels |
512 x 492 pixels |
| Resolution |
420 TV Lines |
| Lens Size |
2.8mm |
| Lens Viewing Angle |
120 Degrees |
| Water Proof |
IP 67 / IP 68 |
| Power Supply |
12V DC |
| Operating Temperature |
-20C + 75C |
| Storage Temperature |
-40C + 85C |
| Mounting Hole Size |
28mm / 1 1/8" |
|
License Plate Frame Backup Camera With Night Vision
(NV_CAMERA4) -
$179 USD
Availability:
In Stock
|
The Nav Video Rear View Camera 4 is a complete license plate frame / camera solution. The standard license plate frame is made of black plastic and features infra red night vision sensors all around it for optimal image viewing in low light conditions. The camera itself is mounted on a swiveling base which allows you to adjust the angle of the camera up or down depending on the height of your license plate.
This particular backup camera has night vision IR sensors that allow you to see what's behind you even in low light or no light environments.
The Nav Video Rear View Camera 4 uses CCD technology, which provides a much clearer image than regular CMOS cameras. The enclosure is completely waterproof and is ideal for flush mount installations.
| Image Sensor |
1/3" Sharp CCD |
| TV System |
NTSC |
| Display Pixels |
628 x 512 pixels |
| Resolution |
420 TV Lines |
| Lens Size |
2.8mm |
| Lens Viewing Angle |
120 Degrees |
| Water Proof |
IP 67 / IP 68 |
| Power Supply |
12V DC |
| Operating Temperature |
-20C + 75C |
| Storage Temperature |
-40C + 85C |
| Mounting Type |
Complete License Plate Frame |
|
Surface Mount Miniature Backup Camera
(NV_CAMERA5) -
$149 USD
Availability:
In Stock
|
The NAV Video CAMERA5 Rear View Camera is ideal for use with the NAV Video line of video interfaces. The camera is mounted to any surface such as trunk lid lip etc. Installation is easy. Simply mount the camera using 3M double-side tape or self tapping screws. The camera adjusts up and down, to allow you to adjust the angle of the video image. The NAV Video CAMERA5 Rear View Camera uses CCD technology. The enclosure is completely waterproof and is ideal for surface mount installations.
| Image Sensor |
1/4" CCD |
| TV System |
NTSC |
| Display Pixels |
510 x 492 pixels |
| Resolution |
420 TV Lines |
| Lens Size |
2.0mm |
| Lens Viewing Angle |
170 Degrees |
| Water Proof |
IP 67 / IP 68 |
| Power Supply |
12V DC |
| Operating Temperature |
-20C + 75C |
| Storage Temperature |
-40C + 85C |
| Mounting Type |
Self Tapping Screws/2 sided tape |
|
Why The Nav Video RGB Unit Is Better The Our Competitors:
- Professionally manufactured board in a rugged metal case.
- IR Infrared remote is included.
- 1 year warranty.
- High picture quality.
- Plug-And-Play wiring harness for easy installation into your vehicle.
