Acura TSX Nav Video TV Interface - NV_RGB_HONDAACURA
Go Back To Nav Video Module Vehicle Compatibility List
Connect A Video Input Such As A DVD Player, TV Tuner, Reverse Backup Camera, Video Game Console, iPod Video or Other A/V Source To Your
Acura TSX
OEM GPS Navigation LCD Display Screen! TV Nav Video Modules Are Easy To Install, Activated For Video In Motion And Are Completely Plug & Play.
| Model: |
|
| Vehicle Compatibility: |
- Acura CL (2004-2006)
- Acura TL (2003-2007)
- Acura TSX (2004-2007)
- Acura RL (2004-2007)
- Acura RDX (2007+)
|
- Acura MDX (2003-2007)
- Honda Accord (2003-2007)
- Honda Odyssey (2005-2007)
- Honda Pilot (2001-2007)
- Honda Ridgeline (2005-2007)
|
|
| Install Manual: |
 |
Product Overview:
The NV_RGB_X Nav Video module is our most popular product and it works with the majority of today's vehicles. This video module is the easiest way to interface a video source such as a DVD Player, TV Tuner, Reverse Backup Video Camera, iPod Video, Video Game Console, PC with composite output or other video source directly to your
Acura TSX
OEM GPS Navigation LCD screen / LCD Display. The NV_RGB_X features dual composite video inputs, one of which can be activated automatically when shifting the vehicle into reverse (usually used with a back-up camera), it also features complete control settings for brightness, color, tint and contrast, as well as a series of DIP switches that are configurable for each vehicle.
The NV_RGB_X is an externally wired plug and play RGB converter interface that is installed inline of the GPS navigation computer in your
Acura TSX
vehicle and LCD screen; it works simply by interrupting the RGB video signal from your GPS navigation computer when you flip a toggle switch or activate 12V on the reverse camera line. When this occurs the GPS navigation system video image will be replaced by the video input that is connected to the NV_RGB_X module. Grounding the black video switch wire attached to the module will allow you to cycle between the OEM Nav and Video input 2. We recommend attaching this wire to a momentary switch (not included) , which is also attached to ground, so when you press the button on the momentary switch, it will go between the oem navigation image and auxiliary video input 2. Video input 1 works in a similar way, except it requires a 12V DC signal on the gray reverse wire on the module. This configuration allows it to be triggered by your reverse lights when used with a backup camera.
The NV_RGB_X is a video only input interface module, which means an FM modulator, FM transmitter or CD changer audio input interface adapter needs to be used to connect the audio signal from your external AV source to your audio system if your vehicle does not have an auxiliary input already available. The NV_RGB_X is video-in-motion enabled, so the video image will stay on the screen even with the car in motion (however we do not recommend or endorse this).
Vehicle Specific Installation Information:
This kit includes the NV_RGB_X module and a plug and play wiring harness that features factory 20pin molex connectors that plug into the navigation computer unit under the passenger seat or in the trunk. You can view a photo of the wiring harness provided by clicking on the "View Module Wiring Harness" button below.
Simply plug the vehicles OEM wiring harness into one end of the wiring harness provided with the NV_RGB_X module, then plug the other end of the NV_RGB_X harness into the location where the vehicles wiring harness was. Then connect 12V power, ground, remote antenna lead, and backup camera connector (if required). The installation is really that simple! Since the unit is plug and play and only requires extra wiring for 12V and ground, it will not void your vehicles factory warranty! Please read our product disclaimer to ensure the safe use of our Nav Video modules.
Please note that the RGB unit works with any NTSC video output device and with most PAL devices, some European PAL DVD players and PAL TV Tuners have been reported incompatible resulting in a vertical shift of the image. However, many European video devices give the option to output in NTSC mode, eliminating any potential problems.
| Optional Nav Video Accessories - Backup / Reverse Cameras |
License Plate Mounted Backup Camera With Night Vision
(NV_CAMERA1) -
$119 USD
Availability:
In Stock
|
The Nav Video Rear View Camera 1 is ideal for use with the Nav Video line of video interfaces. The camera is mounted to a black plastic frame that features two holes spaced apart for mounting on your vehicles license plate frame. Installation is easy. Simply remove the screws from your license plate, place the camera over the license plate. Then re-attach the screws. The camera adjusts up and down, to allow you to adjust the angle of the video image.
This particular backup camera has night vision IR sensors that allow you to see what's behind you even in low light or no light environments.
The Nav Video Rear View Camera 1 uses CMOS technology. The enclosure is completely waterproof and is ideal for quick and easy license plate installation..
| Image Sensor |
1/3" CMOS |
| TV System |
NTSC |
| Display Pixels |
628 x 528 pixels |
| Resolution |
420 TV Lines |
| Lens Size |
2.8mm |
| Lens Viewing Angle |
120 Degrees |
| Water Proof |
IP 67 / IP 68 |
| Power Supply |
12V DC |
| Operating Temperature |
-20C + 75C |
| Storage Temperature |
-40C + 85C |
| Mounting Type |
On License Plate Frame |
|
Surface Mount / License Plate Mount Backup Camera With Night Vision
(NV_CAMERA2) -
$119 USD
Availability:
In Stock
|
The Nav Video Rear View Camera 2 is ideal for use with the Nav Video line of video interfaces. Simply install the camera, connect the video signal to the Nav Video module along with the vehicles reverse wire. When the vehicle is put into reverse, the video image on the module will automatically switch and show the camera video image.
This particular backup camera has night vision IR sensors that allow you to see what's behind you even in low light or no light environments.
The Nav Video Rear View Camera 2 uses CMOS technology. The enclosure is completely waterproof and can easily be surface mounted to the plastic bumper, or license plate frame with two screws or bolts (not provided).
| Image Sensor |
CMOS |
| TV System |
NTSC |
| Display Pixels |
512 x 492 pixels |
| Resolution |
380 TV Lines |
| Lens Viewing Angle |
135 Degrees |
| Water Proof |
IP 67 / IP 68 |
| Power Supply |
8-13V DC |
| Operating Temperature |
-30C + 85C |
| Storage Temperature |
-40C + 85C |
| Mounting Type |
Surface Mount |
|
Flush Mount Backup Camera With Night Vision
(NV_CAMERA3) -
$129 USD
Availability:
In Stock
|
The Nav Video Rear View Camera 3 is ideal for use with the Nav Video line of video interfaces. Simply install the camera, connect the video signal to the Nav Video module along with the vehicles reverse wire. When the vehicle is put into reverse, the video image on the module will automatically switch and show the camera video image.
This particular backup camera has night vision IR sensors that allow you to see what's behind you even in low light or no light environments.
The Nav Video Rear View Camera 3 uses CCD technology, which provides a much clearer image than regular CMOS cameras. The enclosure is completely waterproof and is ideal for flush mount installations.
| Image Sensor |
1/3" Sharp CCD |
| TV System |
NTSC |
| Display Pixels |
512 x 492 pixels |
| Resolution |
420 TV Lines |
| Lens Size |
2.8mm |
| Lens Viewing Angle |
120 Degrees |
| Water Proof |
IP 67 / IP 68 |
| Power Supply |
12V DC |
| Operating Temperature |
-20C + 75C |
| Storage Temperature |
-40C + 85C |
| Mounting Hole Size |
28mm / 1 1/8" |
|
License Plate Frame Backup Camera With Night Vision
(NV_CAMERA4) -
$179 USD
Availability:
In Stock
|
The Nav Video Rear View Camera 4 is a complete license plate frame / camera solution. The standard license plate frame is made of black plastic and features infra red night vision sensors all around it for optimal image viewing in low light conditions. The camera itself is mounted on a swiveling base which allows you to adjust the angle of the camera up or down depending on the height of your license plate.
This particular backup camera has night vision IR sensors that allow you to see what's behind you even in low light or no light environments.
The Nav Video Rear View Camera 4 uses CCD technology, which provides a much clearer image than regular CMOS cameras. The enclosure is completely waterproof and is ideal for flush mount installations.
| Image Sensor |
1/3" Sharp CCD |
| TV System |
NTSC |
| Display Pixels |
628 x 512 pixels |
| Resolution |
420 TV Lines |
| Lens Size |
2.8mm |
| Lens Viewing Angle |
120 Degrees |
| Water Proof |
IP 67 / IP 68 |
| Power Supply |
12V DC |
| Operating Temperature |
-20C + 75C |
| Storage Temperature |
-40C + 85C |
| Mounting Type |
Complete License Plate Frame |
|
Surface Mount Miniature Backup Camera
(NV_CAMERA5) -
$149 USD
Availability:
In Stock
|
The NAV Video CAMERA5 Rear View Camera is ideal for use with the NAV Video line of video interfaces. The camera is mounted to any surface such as trunk lid lip etc. Installation is easy. Simply mount the camera using 3M double-side tape or self tapping screws. The camera adjusts up and down, to allow you to adjust the angle of the video image. The NAV Video CAMERA5 Rear View Camera uses CCD technology. The enclosure is completely waterproof and is ideal for surface mount installations.
| Image Sensor |
1/4" CCD |
| TV System |
NTSC |
| Display Pixels |
510 x 492 pixels |
| Resolution |
420 TV Lines |
| Lens Size |
2.0mm |
| Lens Viewing Angle |
170 Degrees |
| Water Proof |
IP 67 / IP 68 |
| Power Supply |
12V DC |
| Operating Temperature |
-20C + 75C |
| Storage Temperature |
-40C + 85C |
| Mounting Type |
Self Tapping Screws/2 sided tape |
|
Why The Nav Video RGB Unit Is Better The Our Competitors:
- Professionally manufactured board in a rugged black metal case.
- All adjustments are on the outside.
- 1 year warranty.
- High picture quality.
- Plug-And-Play wiring harness for easy installation into your vehicle.
